اتصل بنا

الهاتف: +86 19540588776
WhatsApp / Wechat: +86 19540588776
البريد الإلكتروني: info@yunshao.com
العنوان: مبنى 6، حديقة جوانلان الصناعية للتكنولوجيا الفائقة، منطقة لونغغانغ، مدينة شنتشن، مقاطعة قوانغدونغ ce، الصين

كتالوج الصفحة

304 vs 316 Stainless Steel Turnstile Gates
304 vs 316 Stainless Steel Turnstiles at a Glance
Why Is 316 Better for Coastal Environments?
Which Grade Should You Choose for Your Project?
What Else Matters Beyond Stainless Steel Grade?
What Should Buyers Confirm Before Ordering?
Recommended YUNSHAO Stainless Steel Turnstile Gates
الأسئلة الشائعة
مقالات ذات صلة

304 vs 316 Stainless Steel Turnstile Gates

When comparing 304 vs 316 stainless steel turnstile gates, buyers should look beyond appearance. Selecting entrance equipment for offices, factories and outdoor facilities requires considering corrosion exposure and material scope. Both grades offer durable, professional-looking housings, but their resistance to salt and aggressive environments differs.

إجابة سريعة: Choose 304 stainless steel for many indoor and moderate-exposure entrances. Consider 316 for coastal, salt-contaminated or more corrosive locations. Neither grade alone makes a turnstile waterproof or maintenance-free.

304 vs 316 Stainless Steel Turnstiles at a Glance

The main distinction is corrosion resistance, not appearance or a guaranteed difference in gate security.

عامل	304 Stainless Steel	316 Stainless Steel
Typical alloy feature	Chromium and nickel austenitic grade	Similar base alloy with added molybdenum
Salt exposure	More vulnerable to chloride staining and pitting	Better resistance to chloride-related pitting
Common application	Offices, gyms and sheltered entrances	Coastal or more corrosive installations
Relative material cost	Generally lower	Generally higher
Maintenance	Regular cleaning and inspection	Still needs cleaning and inspection

Both grades can be supplied with brushed or polished finishes. Cabinet thickness, welding quality, fasteners and installation conditions remain important regardless of the grade selected.

Why Is 316 Better for Coastal Environments?

Type 316 contains molybdenum, which improves resistance to localized corrosion caused by chlorides. This matters near the sea, around de-icing salts or in certain industrial environments. Type 304 performs well in many normal atmospheres but may develop staining or pitting when salt deposits remain on the surface.

316 is not rust-proof. Salt deposits, trapped moisture, contaminated fabrication tools and poor weld finishing can still cause corrosion. It is not automatically suitable for direct seawater contact. Where exposure is severe, discuss the full corrosion specification with the manufacturer.

Which Grade Should You Choose for Your Project?

بيئة التركيب	Practical starting point
Indoor offices, gyms and schools	304 is often sufficient with suitable finishing and cleaning.
Sheltered outdoor entrance	Assess 304 against humidity, cleaning products and local pollutants.
Coastal or salt-laden outdoor entrance	Evaluate 316 and suitable exposed fasteners and finishes.
Heavy industrial or highly corrosive site	Request a project-specific material and coating review; 316 may not be sufficient.

Do not select a grade only by distance from the coastline. Wind, humidity, drainage, local pollution and maintenance frequency can change the actual exposure. For wider outdoor selection advice, see the دليل شراء بوابات الدخول الدوارة الخارجية.

What Else Matters Beyond Stainless Steel Grade?

Material scope: Confirm whether the grade applies to the cabinet, frame, rotor, barrier arms and exposed fasteners—not just one panel.
Fabrication: Ask about sheet thickness, weld finishing, surface treatment and protection from carbon-steel contamination.
Weather protection: Check the gate’s actual IP rating plus the protection of readers, controllers and cable entries. Steel grade does not determine IP rating.
Care: Plan regular washing, inspection and appropriate cleaning chemicals, especially after salt exposure.

For more detail about 304 construction and finishes, read بوابات دوارة من الفولاذ المقاوم للصدأ 304.

What Should Buyers Confirm Before Ordering?

Request a clear written specification rather than assuming every component uses the advertised grade.

Buying detail	ما يجب التحقق منه
Material and finish	304 or 316 for each specified part, sheet thickness, finish and fastener grade
Site conditions	Indoor or outdoor, salt exposure, humidity, pollutants and cleaning requirements
Gate configuration	Passage width, mechanism, accessible route, access-control integration and emergency release
Commercial scope	Material upgrade cost, warranty terms, drawings, spare parts and maintenance guidance

Some YUNSHAO product pages specify a 304 stainless steel framework by default with 316 available as an option. That does not mean every arm, rotor or internal component automatically changes to 316. Confirm the exact upgrade scope in the quotation.

Recommended YUNSHAO Stainless Steel Turnstile Gates

Explore eight YUNSHAO turnstile types for different entrance requirements. Material options and outdoor suitability depend on the selected model and project configuration; confirm any 316 upgrade before ordering.

عرض جميع بوابات الدخول الدوارة →

للحصول على تفصيل مقارن أكثر تفصيلاً، اقرأ مقارنة أنواع بوابات الدوران.

الأسئلة الشائعة

Is 316 stainless steel always better than 304?

Not always. 316 offers better resistance to chloride-related corrosion, but 304 can be the more economical choice for many indoor or less aggressive sites.

Will a 316 stainless steel turnstile never rust?

No. Poor fabrication, trapped salt deposits and neglected surfaces can still lead to staining or localized corrosion. Cleaning and proper detailing remain necessary.

Does 316 stainless steel make a turnstile waterproof?

No. Water ingress protection depends on the enclosure, seals, cable entries and installed electronics. Verify the IP rating of the complete configuration.

Can I order a turnstile with a 316 stainless steel housing?

Selected YUNSHAO configurations list optional 316 framework material. Confirm which parts can be upgraded, the finish, pricing and lead time with the manufacturer.